Liechtenstein inland canal

Artificial water stream in Liechtenstein

The inland canal in Liechtenstein is a 23 km (14 mi) long artificial stream of water created between 1931 and 1943. The canal receives water from twelve Alpine streams and flows into the Alpine Rhine near the country's northern end.^[1] It is considered one of the most significant constructions in the country.^[2]

History

Plans to build an inland canal in Liechtenstein date back to the 18th-century due to increased waterlogging of the river and the restricted flow of streams in the Alpine valley. In 1834 a canal was built between Schaan and Bendern in order to address this, but there was no permanent drainage into the connecting Rhine river. In 1894, the proposal for a inland canal extensively flowing through the country was first brought up for discussion in the Landtag of Liechtenstein.^[2] After six years of reports, the plan was first adopted by engineer Josef Vogt based on the design of Austrian engineer Philipp Krapf, but was not conducted due to huge costs.^[2]^[3]

Under the initiative of the government of Josef Hoop and politician Ferdinand Risch, the Landtag accepted the proposal for the building of the canal on 7 July 1930 and then it was approved following a referendum on the topic on 14 December of the same year.^[2]^[4] The canal was intended to provide construction jobs in addition to bringing additional arable land into Liechtenstein in order to increase farming and thus more employment to the country.^[2]^[5]

Franz Jopseh II and Princess Gina at the ground-breaking ceremony on 3 April 1943

Celebration of the opening of the Liechtenstein canal in April 1943.^[a]

The construction was conducted in various stages while several subsidiary canals were built to support it. The canal was officially completed on 3 April 1943 and the ground-breaking ceremony was conducted by Franz Joseph II and Countess Georgina von Wilczek.^[2] The total cost of the canal equated to 4.6 million Swiss francs (approximately 21.7 million in 2024).^[1]

Since 1984, the Liechtenstein government has conducted several revitalization projects of the canal and in 2000 the canal's mouth into the Rhine was redesigned into a natural formation.^[1]^[2]

Notes

^ The plaque on the bridge reads "A milestone in Liechtenstein's work is the completion of this great national project. Built under the government of Dr. Hoop & Rev. Frommelt. That's why the people of Liechtenstein thank them."

References

^ ^a ^b ^c "Gewässer – Revitalisierungsprojekte in Liechtenstein, Liechtensteiner Binnenkanal (LBK)" (PDF). Regierung des Fürstentums Liechtenstein (in German). Retrieved 7 February 2024.
^ ^a ^b ^c ^d ^e ^f ^g Haidvogl, Gertrud (31 December 2011). "Binnenkanal". Historisches Lexikon des Fürstentums Liechtenstein (in German). Retrieved 30 July 2023.
^ Frick, Florin (31 December 2011). "Vogt, Josef". Historisches Lexikon des Fürstentums Liechtenstein (in German). Retrieved 7 February 2024.
^ Dieter Nohlen & Philip Stöver (2010) Elections in Europe: A data handbook, p1171 ISBN 978-3-8329-5609-7
^ Frey, Stefan (31 December 2011). "Arbeitsbeschaffung". Historisches Lexikon des Fürstentums Liechtenstein (in German). Retrieved 10 October 2023.

Tributaries of the Rhine

Left

Vorderrhein: Aua da Russein; Schmuèr
Alpine Rhine: Vorderrhein; Tamina; Saar
Alter Rhein: Rheintaler Binnenkanal
Upper Lake Constance: Goldach; Aach (Arbon); Aach (Romanshorn)
Lake Rhine: Grenzbach; Dorfbach
Lower Lake Constance: Anderbach
High Rhine: Thur; Töss; Glatt; Aare; Sissle; Möhlinbach; Ergolz; Birs
Upper Rhine: Birsig; Ill; Moder; Sauer; Lauter; Spiegelbach; Queich; Speyerbach; Rehbach; Isenach; Eckbach; Eisbach; Pfrimm; Selz
Middle Rhine: Welzbach; Nahe; Moselle; Nette; Brohlbach; Ahr
Lower Rhine: Erft